China, flash LED y regalos del fabricante intermitente juguetes - Regalos al por mayor de Flash de fábrica china directamente

Services

Sample Availability & Policy

Prices are calculated upon receipt of the customer’s detailed requirements. Usually quotation could be provided within 24 hours.

Samples are sent by express, usually via customer’s appointed carrier such as FEDEX, UPS, DHL etc.

Production begins as soon as the customer agrees to our terms, upon sample approval.
 

Quality Assurance:

Our process includes many quality procedures, in-line and final production.

At our workterm, we are committed to quality requirements of the best standard. We do not sacrifice on quality. We make sure quality is adhered to throughout our operation from sampling to final shipment. We take extra efforts in ensuring the suppliers comply with strict quality control. Quality Assurance is an inherent part of our services and we ensure that our customers do not face any problem at any stage
 

Quality Control and Inspection Procedures:

We normally follow AQL Level 4.0 inspection method, but on special case we follow any inspection method our customers require. Our quality control and inspection procedure includes the following functions:

1. Our Quality Assurance department checks all the Accessories to ensure that quality/color etc conforms to the order / style.

2. Our Quality Assurance and merchandising team goes to factory location to evaluate pre-production (size set) sample, patterns, etc to approve for trial production.

3. Quality Assurance team evaluates trial production and then finally approves for bulk production

4. As bulk production starts, our Quality Assurance team goes for inline inspection. This inline inspection during production is performed on daily basis.

5. At the middle stage of production if (standard of quality) result is acceptable / good then we go for pre-final inspection. Here we check the case pack, carton quality, shipping mark, assortment, presentation etc.

6. If the pre-final result is acceptable then we go for final inspection & if it passes, we approve for the final shipment.

To ensure quality of the highest standard, we inspect at every stage of the production process. The following Quality & Inspection steps are being currently employed in sourcing and manufacturing:

About Our R & D Department

Our R&D is undertaken by the Technology Research Department, which consists of the Sample Exhibition Center (SEC), the CAD-Technology Center (CADTC) and the Sample-Working Center (SWC). The SEC displays thousands of samples covering most of our product range. The CADTC is responsible for plate/pattern making, style designing, calculating predicted consumption, graphic processing and photo production. The SWC mainly functions as a sample design and production center.
 

Product Design

1.Prototype development

2.Research on size

3.Refining manufacturing process

4.Rapid materials estimation

Production Design

1.Processing skill

2.Mass production method

3.Equipment for mass production

4.Aided equipment for mass production

5.Production flow

6.Production arrangement
 

Artwork Design:

- Artwork for embroidery/printing to be provided by customer.

- Mould charge is not required for new design after order placed.

- Our professional graphic designer can turn your draft for embroidery/printing into beautiful artwork at low cost.
 

We offer embroidery and printing service as below:

printing

Discharge ﹡Emboss ﹡Flock ﹡Glitter (Silver & Gold) ﹡Hi-Density ﹡Jelly

Laser ﹡ Plastisol ﹡Puff ﹡Silkscreen ﹡Transfer ﹡Water Base

 

Advantages of technical research and development

To provide multi-product combination, and enhance the competitiveness on creating specified products.
 

Quotations

Normally your quotation is received within one working days (please note any time difference between countries).
 

Production Lead-time:

After order confirmation, please allow 15-20 days for print-proof/approval sample. Once confirmed, allow 25-45 days production. Lead times vary depending on seasons, availability of raw materials and components. 

Guarantees/Warranties/Terms and Conditions

We take full responsibility for any inconformity with buyers' requests in color, quantity, packing and size.

We guarantee the protection of customers’ designs, workmanship, patents and copyrights.

Customized design service is available, executed by professional designers from packaging design majors. Our own designs could be exclusively provided.

Terms could be FOB, CFR, CIF, CIP, DDU, DDP etc.

Logistics Operation Support

Our staff in the Foreign Trade Department are all experienced in the exporting industry.

Being a supply chain service provider, we have the knowledge and expertise to provide total logistic and transportation solutions to our customers. Our qualified personnel work in close association with leading freight forwarders, air and shipping lines at various locations. In addition, we can provide you specific value added services by pre advising all shipments on a regular basis with tentative arrival dates.

- 1 set Form A or Certificate of Origin is provided for each order (for shipment quantity > 1,000pcs & > US$1,500.-)

- The cost of each extra set of Form A is US$70.- and extra set of Certificate of Origin is US$20.-

- Export license (Quota) is required for the States. Its cost is depends on the market fluctuation.
 

Customers visit our facility

Logistics operation