China, flash LED y regalos del fabricante intermitente juguetes - Regalos al por mayor de Flash de fábrica china directamente

Quality Control

---

Our QC department is composed of 16 professional technicians and a big team of numerous inspectors. They test and inspect every production process. By using advanced testing equipment and strictly following inspection procedures and regulated quality standards, we make sure our final products meet our customers’ standards before delivery. With rich experiences of exporting to USA, Canada, Japan, Germany, UK etc. for years, we built up our own complete quality control system and clear understanding on quality requests from customers all over the world.

 

For Flashing Gifts&Toys, we set up four steps of quality control:

4.Press fold inspection - 100%

5.Final audit on finishing & packing - 100%

6.Broken needle management system (metal detector) – 100%

 

We are committed quality requirements of the highest standard. We do not sacrifice on quality. We make sure quality is adhered to throughout our operation from sampling to final shipment. We take extra efforts in ensuring the suppliers comply with strict quality control. Quality Assurance is an inherent part of our services and we ensure that our customers do not face any problem at any stage.

 Sampling Quantity:

Visual Inspection	100%
Measurement Check	2 out of 10 pieces

In case of any variation in the above parameters, the complete bundle is returned to the cutting department for correction/replacement.

Acceptance Standard:

Bundle Size	Defects allowed
Up to 5 Pieces	0
6 to 10 pieces	1
11 to 15 pieces	2
16 to 20 pieces	3
More than 20 pieces	4

 

Where it is possible to change the defective part by replacement, the quality inspector checks the exchanged part for shade variation, and measurement and ensure to put the same number that of the damaged part.

 

Reporting defects Rate:

Defects rate in cutting= The total defects found / No of bundle checked

Report generated of all procedures and archived

Cutting QA Report – Exhibit 3A

 

Potential Major faults

 

1. Any surface hole or weakening defects which could develop into a hole

2. Visible flaws

3. Shading within the garment

4. Dye spots, misprints

5. Cuts and tears

6. Non matching checks and stripes

7. Bowing of fabric, if it effects the appearance of the accessories

8. Spots or stains

9. Deviation in measurement specs more than the given tolerance

 

Potential minor faults.
 

1. Removable stains

2. All other temporary defects other than listed above.
 

In-line quality audit

The quality inspector conducts in-line quality audit as per the steps mentioned below:
 

1. Pick up one bundle after any operation at random

2. Check the quality level of that particular operation

3. Repeat this procedure for minimum of 3 times of the same operation within a day
 

In case some type of rejection is encountered repeatedly, production is held temporarily until corrective action is ensured by line supervisor.

 

Pilot run

Depending on the size of the order, pilot run is carried out. All the pieces are visually inspected and measurement for any quality defects. The sample sizes for pilots runs are as follows:

 

Order Quantity	Pilot Strike Off
Up to 3000pcs	25pcs
3001 to 6000pcs	40pcs
6001 to 9000pcs	60pcs
9001 to 15000pcs	75pcs
Above 15,000pcs	100pcs

Any major deviation in measurement or style is incorporated in the pattern/sewing line before the bulk production start. Report generated and archived

 

1. Sewing in-line quality audit --4A

2. Pilot run quality audit ---4B

  

The pilot quantity of strike off:

 

Order Quantity	Pilot Strike Off
Up to 2000pcs	15pcs
2001 to 5000pcs	25pcs
5001 to 8000pcs	35pcs
8001 to 15000pcs	50pcs
Above 15000pcs	60pcs

The pilot strike off panels/garments are 100% visually inspected and changes are incorporated in the bulk production.

 

Reports generated and archived

1. Embroidery pilot run quality audit report Exhibit ---5A

2. Daily embroidery quality report Exhibit –5B

 

Approved Sample

The QA ensures that an approved strike off of the print with the shade card giving the pantone references number. Is available with the Department. Sample of the garment along with the placement details must be available. Before starting bulk production, pilot strike off of using the actual garment /panel is taken and inspected for the following quality.

Parameters

1. Right shade of colors

2. Positioning of the print

3. Proper registration

4. Print alignment

5. Clarity in the design as per original

6. Properly cured surface

7. Stains

8. Skew ness of print

 

The pilot quantity of strike off

Order Quantity	Pilot Strike Off
Up to 2000pcs	15pcs
2001 to 5000pcs	25pcs
5001 to 8000pcs	35pcs
8001 to 15000pcs	50pcs
Above 15000pcs	60pcs

 

The pilot strike off panels/garments are 100% visually inspected and changes are incorporated in the bulk production.

 

Reports generated and archived

1. Print pilot run quality audit report – Exhibit 6A

2. Daily print quality report Exhibit – 6B

 

Packing is an important aspect of a given products. The following aspects are checked by the inspector:

1. The price ticket, hangtag, bar code stickers.

2. The right size of the poly bag should be used for the garment

3. After the garment is inserted in the poly bag, it should not be sloppy or too tight.

4. The ratio of pre-packs and qualities per carton must be checked randomly.

5. The garment through the poly bag must be visually symmetric

6. All carton markings must conform to the order requirement

 

Reports generated and archived

1. Ironing QA Report—Exhibit –7A

 

The purpose of the final, audit is to establish the quality level of the final pieces goods before it leaves the factory.

 

The QA manager has to conduct a final quality audit of the packed goods and this has to done at two stages:

1. Once 50% of the shipment is packed

2. Other when 100% of the shipment is packed

 

In case there is any quality problem at the above stages, the packed goods have to be screened for the specific quality aspects

Once corrected the above procedure has to be repeated again.

Reports generated and archived

Final quality audit report – Exhibit 8A

World Wide AQL Service

Table A: Sample Size

 

World Wide AQL Service

Table B: Single Sampling plans for normal inspection level II